With competitive price and timely delivery, NB sincerely hope to be your supplier and partner.
Protecting Battery with Adhesive PET
Step 1: Prepare the Adhesive PET
To protect the battery with adhesive PET, the first step is to prepare the adhesive PET sheet. Make sure the sheet is clean and free of any dust or debris. Cut the adhesive PET into the desired shape and size to cover the battery effectively.
Step 2: Clean the Battery Surface
Before applying the adhesive PET, it is essential to properly clean the surface of the battery. Use a soft cloth or cotton swab soaked in alcohol to remove any dirt, oil, or residue from the battery surface. This will ensure a strong bond between the adhesive PET and the battery.
Step 3: Apply the Adhesive PET
Carefully peel off the backing of the adhesive PET sheet to expose the adhesive side. Align the sheet with the battery surface and slowly apply pressure to ensure a secure bond. Smooth out any air bubbles or wrinkles that may form during the application process.
Step 4: Trim the Excess Adhesive PET
Once the adhesive PET is firmly attached to the battery surface, trim any excess material with a sharp pair of scissors or a utility knife. Be careful not to cut too close to the edges of the battery to avoid exposing it to potential damage.
Step 5: Test the Battery
After applying the adhesive PET, test the battery to make sure it is functioning correctly. Check for any overheating or abnormal behavior that may indicate a poor connection or inadequate protection. If necessary, reapply the adhesive PET or seek professional help.By following these steps, you can effectively protect the battery with adhesive PET and prolong its lifespan. Remember to handle the adhesive PET with care and attention to detail to ensure maximum protection for your battery.
Read more
If you want to learn more, please visit our website Battery protection with adhesive PET.