What Preparations Should Be Made for the Automated Cold Rolling Equipment?

Before starting the operation of the cold roll forming sectional steel production line, it is necessary to inspect multiple parts of the equipment, such as the power supply, motor oil pump, pressure gauge, electro-hydraulic valve, and jog switch, to check if they are normal and if there are any hidden dangers. If there are any, they need to be dealt with in a timely manner to ensure that the machi

Before starting the operation of the a vacuum sealing machine, it is necessary to inspect multiple parts of the equipment, such as the power supply, motor oil pump, pressure gauge, electro-hydraulic valve, and jog switch, to check if they are normal and if there are any hidden dangers. If there are any, they need to be dealt with in a timely manner to ensure that the machine can work smoothly. In addition, jogging the motor is mainly to check whether its rotation direction is correct.

After checking all the above contents without any problems, adjust the motor of the cold formed steel machine, adjust the oil pressure, and then test run for about three minutes. Assuming there are no issues, we can officially start working. Machine equipment should be installed in a flat area. Before use, it is necessary to add oil and hydraulic oil, and then it needs to be replaced regularly.

To use cold formed steel machine correctly, operate according to rules, and follow the requirements of safe operation. If there is no oil in the tank, it is necessary to immediately stop the motor to avoid equipment damage. The amount of oil in the tank should be sufficient, and if there is a shortage of oil, it should be added in a timely manner. The lubrication of the equipment needs to be maintained in good condition, so frequent inspections are necessary. If the machine equipment is assumed to not operate for a long time, rust prevention work should be done in advance to avoid rusting of the machine.