trioflor are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.
Installing floors can be a daunting task, especially if you are not familiar with the process. However, with SPC click vinyl flooring, the installation process is relatively easy. This flooring is a versatile and durable option that works great for both residential and commercial spaces. The best part is that with its DIY-friendly installation method, you don't have to hire an expert to get it installed. In this blog, we will walk you through the step-by-step guide on how to install SPC click vinyl flooring. Let’s dive in.
Tools Required:
You will need some essential tools to get your SPC click vinyl flooring installed. The tools that you need include; measuring tape, chalk line, spacers, utility knife, pry bar, a hammer, a tapping block, a pull bar, safety glasses, and a dust mask.
Step 1: Preparation.
Before you start your installation, ensure that your subfloor is clean, dry, smooth, and level. Any dirt, dust, or debris can affect the installation process. Ensure that the subfloor is level, especially if you have a concrete subfloor by filling in any low spots using a self-leveling compound and sand high spots. Additionally, it is worth noting that SPC click vinyl flooring can be installed directly over most existing floors, like ceramic tiles, carpets, and hardwood floors, but they should be flat, firm, and dry. Finally, let the planks rest in the room to acclimate for 48 hours, and don't forget to remove the baseboards and door casings.
Step 2: Plan your Layout.
Planning and laying out the planks beforehand will save you time and reduce wastage. Start by determining the direction you want your floor to run, which is usually along the dominant light source. If you have a long and narrow room, it's better to lay the planks parallel to the longest wall. Start by snapping a chalk line ¼ inch away from the starting wall to ensure that your planks run straight. It's also recommended to use spacers to allow room for expansion and contraction.
Step 3: Installation.
Now that your subfloor is ready and you have planned your layout, you can proceed to install your SPC click vinyl flooring:
1. Begin by laying your first row of planks. Start with a full plank, placing it against the starting wall, ensuring that the tapered tongue side is facing the wall. Use spacers to create a gap between the wall and the plank for expansion. The tongue side snaps into the groove side of the next plank.
2. For the second plank, connect the short end using the angled side tongue onto the first plank. Then connect the longer side, angling down, and clicking into position.
3. Repeat the same process until you install the first row of planks, ensuring that the planks are tight together, and there are no gaps. If you reach the end of the row, and the plank needs to be cut, measure the remaining space before cutting, and use the remaining plank for the next row if it's long enough.
4. For the second row, cut the first plank using a utility knife and starting halfway, ensuring that the end joints are staggered. Then connect it to the first row, snapping in place.
5. Use a tapping block and a hammer to ensure that the row fits snugly together.
6. Repeat the process for the subsequent rows, ensuring that you use the cutoff of the previous row as the beginning of the next row.
7. Continue installing the rows until you reach the final row.
Step 4: Finish the Final Row.
When you reach the final row, you may need to make some cuts to ensure that the planks fit correctly. Measure the space between the wall and the plank and cut the plank according to the measurements. Ensure that it fits securely in the gap. Finally, to complete the installation, reinstall the baseboards and door casings.
Final Thoughts.
In conclusion, SPC click vinyl flooring is an ideal option for anyone looking for an affordable, easy-to-install, and durable flooring option. By using the step-by-step guide outlined above, you can install your own SPC click vinyl flooring with minimal experience. However, ensure that you have all the tools required to get the job done efficiently and take all the necessary safety precautions. Finally, have fun with it and remember that you are investing in a long-lasting and beautiful floor that will serve you for years to come.
For more information, please visit our website.
For more information, please visit spc click vinyl flooring.